Exception Handling; Phase Sequencing - Tandberg Data SLR7-140 PROGRAMMER Manual

<sequence 1>
<sequence 2>
Tandberg Data

15.4. Exception Handling

See sections on Error Conditions For All Commands and
Deferred Errors.
If the PF bit is not set to one, the MODE SENSE command
will be terminated
Error Code will be set to I
If the Page Code is not in the range of legal values,
the MODE SENSE command will be terminated with CHECK
CONDITION status. The Error Code will be set to I
CDB.
FIELD IN

15.5. Phase Sequencing

In this section the possible SCSI-bus phase sequences
during execution of the command are described. Section
3.2.1 has more details about the generic phases in the
brackets.
:= <initiator-part> <message-out> <command> <data-in> <completed>
This sequence will be used when the MODE SENSE command
does not follow an Immediate type command.
:= <initiator-part> <message-out> <command> <disconnect> <reconnect>
<data-in> <completed>
This sequence will be used when the MODE SENSE command
follows an Immediate
disconnect when the CDB has been transferred. The Drive
will reconnect when the previous Immediate command has
completed execution.
15-13 Tandberg SLR Product Line SCSI Functional Specifications
with CHECK CONDITION
NVALID FIELD IN
type command.
Mode Sense
status. The
CDB.
NVALID
The Drive will