Tandberg Data SLR7-140 PROGRAMMER Manual page 235

RAC
SWP
RAERP
UAAERP
EAERP
Ready AER Holdoff
Period
Queue Algorithm
Modifier
Busy Timeout
Period
Tandberg Data
The Report A Check (RAC) field must be set to 0h, it is
not changeable.
condition instead of CHECK CONDITION.
The Software Write Protect (SWP) bit must be set to 0h,
it is not changeable.
software write protect.
The RAERP field must be set to 0h, it is not changeable.
The Drive does
notification.
The UAAERP field
changeable. The
event notification.
The EAERP field must be set to 0h, it is not changeable.
The Drive does
notification.
The Ready AER Holdoff period field must be set to 0h, it
is not changeable.
asynchronous event notification.
This field must be set to 0h, it is not changeable. The
drive does not support tagged queuing.
This field must be set to FFFFh, it is not changeable
(the Initiator allows the Drive to remain busy for an
unlimited period for unanticipated conditions which are
not a routine part of commands from the Initiator).
14-17 Tandberg SLR Product Line SCSI Functional Specifications
The Drive will
The Drive
not support
must be set
Drive does not
not support
The Drive
Mode Select
report long
does not support
asynchronous event
to 0h, it is
support asynchronous
asynchronous event
does not support
busy
not