Exception Handling; Phase Sequencing - Tandberg Data SLR7-140 PROGRAMMER Manual

Scsi interface functional specification
Table of Contents

Advertisement

<sequence 1>
Tandberg Data

26.5. Exception Handling

See
sections
on
Deferred Errors and Buffer Parity Errors.
If
the
PF
bit
terminate
the
CONDITION status. No diagnostic tests will be performed.
The Error Code will be set to I
If the ST, DOF and UOF bits are not within the legal
values, the Drive will terminate the SEND DIAGNOSTICS
command with CHECK CONDITION status. No diagnostic tests
will be performed. Error Code will be set to I
CDB.
IN
If ST bit is set to one and parameter list length is not
zero,
the
Drive
command with CHECK CONDITION status. No diagnostic tests
will be performed. The Error Code will be set to I
CDB.
FIELD IN
If the Parameter List Length is not within the legal
value, the SEND DIAGNOSTICS command will be terminated
with CHECK CONDITION status. No diagnostic tests will be
performed. The Error Code will be set to I
CDB.
If the Parameter List has any illegal values, the SEND
DIAGNOSTICS
command
CONDITION status. No diagnostic tests will be performed.
The Error Code will be set to I
If DOF bit is set to one but the media is not present,
the SEND DIAGNOSTICS command will be terminated with
CHECK
CONDITION
performed. The Error Code will be set to M

26.6. Phase Sequencing

In this section the possible SCSI-bus phase sequences
during execution of the command are described. Section
3.2.1 has more details about the generic phases in the
brackets.
:=
<initiator-part> <message-out> <command> <disconnect> <reconnect>
<completed>
The
Drive
will
transferred.
The
diagnostic activities are executed.
26-5
Tandberg SLR Product Line SCSI Functional Specifications
Error
Conditions
is
not
set
to
SEND
DIAGNOSTICS
NVALID FIELD IN
will
terminate
will
be
NVALID FIELD IN PARAMETER LIST
status.
No
diagnostic
disconnect
when
Drive
will
reconnect
Send Diagnostics
For
All
Commands,
zero,
the
Drive
command
with
CDB.
NVALID FIELD
the
SEND
DIAGNOSTICS
NVALID FIELD IN
terminated
with
tests
will
EDIUM NOT PRESENT
the
CDB
has
when
all
will
CHECK
NVALID
CHECK
.
be
.
been
the

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SLR7-140 PROGRAMMER and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

This manual is also suitable for:

Slr7Slr50Slr60Slr75Slr100Slr140

Table of Contents