Control Mode Page; Table 14-16: Control Mode Page Descriptor - Tandberg Data SLR7-140 PROGRAMMER Manual

BYTE BIT 7
00 PS
01 Page Length = 0Ah
02 RESERVED
03 Queue Algorithm Modifier
04 R
05 RESERVED
06 Ready AER Holdoff period
07
08 Busy Timeout Period
09
10 RESERVED
11 RESERVED
PS
Page Code
Page Length
GLTSD
RLEC
Queue Algorithm
Modifier
QErr
DQue
Tandberg Data
14.3.5.

Control Mode Page

This page is used to specify features as tagged queuing,
asynchronous event reporting and error logging.
The page can not be saved.
6 5
R Page Code = 0Ah
RAC RESERVED
Table 14-16: Control Mode Page Descriptor
The Parameter Savable (PS) bit must be set to zero.
The Page Code for this page must be set to 0Ah.
The Page Length field must always be set to 0Ah.
The Global Logging Target Save Disable (GLTSD) bit must
be set to 0, it is not changeable (the Drive will
provide a target-defined
parameters).
A Report Log
indicates that
conditions. A RLEC bit of zero indicates that the Drive
will not report log exception conditions. See the LOG
SELECT command
criteria and enabling of threshold comparison (ET).
Legal values are 0 and 1.
The default (factory programmed) value is 0.
The Queue Algorithm Modifier field must be set to 0h, it
is not changeable. The Drive does not support tagged
queuing.
The Queue Error Management (QErr) field must be set to
0h, it is not changeable. The Drive does not support
tagged queuing.
The Disable Queuing (DQue) field must be set to 0h, it
is not changeable.
Parameter List indicates that the Drive not supports
tagged queuing.
14-16 Tandberg SLR Product Line SCSI Functional Specifications
4 3
RESERVED
SWP
method
Exception Condition
the Drive will
for further information
The CmdQue
Mode Select
2 1
GLTSD
QErr
RAERP UAAERP
for saving
(RLEC) bit of
report log exception
on threshold
bit in the INQUIRY
0
RLEC
DQue
EAERP
log
one