Tandberg Data SLR7-140 PROGRAMMER Manual page 349

<sequence 4>
<sequence 5>
Tandberg Data
:= <initiator-part> <message-out> <command> <completed>
This sequence will
allowed and an error is detected during the initial part
of the WRITE command or when the Transfer Length is
zero.
:= <initiator-part> <message-out> <command> <data-out> <completed>
This sequence will
allowed and some data is transferred to the drive.
30-9 Tandberg SLR Product Line SCSI Functional Specifications
be used when disconnect
be used when disconnect
Write
is not
is not