Exception Handling; Phase Sequencing - Tandberg Data SLR7-140 PROGRAMMER Manual

Time Stamp for
last completed
SAD
Current Time
Stamp
<sequence 1>
<sequence 2>
Tandberg Data
This Time Stamp is the Power On Time in Minutes in the
drive when the last Stand Alone Diagnostics Test was
completed.
The Power On Time in Minutes when the RECEIVE
DIAGNOSTICS command was issued.

21.5. Exception Handling

See sections on
Deferred Errors and Buffer Parity Errors.

21.6. Phase Sequencing

In this section the possible SCSI-bus phase sequences
during execution of the command are described. Section
3.2 has more details about the generic phases in the
brackets.
:= <initiator-part> <message-out> <command> <disconnect> <reconnect>
<completed>
The Drive will
transferred. The
transferring the result data.
:= <initiator-part> <message-out> <command> <completed>
This sequence will be used when the command is executed
and the Initiator does not allow disconnection.
21-7 Tandberg SLR Product Line SCSI Functional Specifications
Error Conditions
disconnect when
Drive will
Receive Diagnostic Results
For All Commands,
the CDB has been
reconnect before