Table 9-11: Drive Adjustment Date Page - Tandberg Data SLR7-140 PROGRAMMER Manual

BYTE BIT 7
00 Peripheral Qualifier
01 Page Code = C4h
02 RESERVED
03 Page Length = 09h
04 Drive Adjustment Date – Month
05
06
07 Day
08
09
10 Year
11
12 End Of String = 00h
Peripheral Qualifier
Peripheral Device
Type
Page Code
Page Length
Drive Adjustment
Date
Tandberg Data
9.3.2.9. Drive Adjustment Date
6 5
Table 9-11: Drive Adjustment Date Page
This field will
Unsupported LUN condition exists (If an IDENTIFY message
is received, the LUN field in the Command descriptor
block will be ignored and only the LUN field in the
IDENTIFY message will be evaluated.), this field will,
however, be set to 3.
This field is normally set to 1. When an Unsupported LUN
condition exists, this field will, however, be set to
1Fh.
This field will be set to the value of the Page Code
field in the Command Descriptor Block.
This field specifies
parameters that follow the Page Length field.
These 8 ASCII characters represent the date of the last
drive adjustment on the format 'MM.DD.YY'. The string is
terminated with a zero (00h) character.
9-15 Tandberg SLR Product Line SCSI Functional Specifications
4 3
Peripheral Device Type
"."
"."
normally be set
the length
Inquiry
2 1 0
to zero. When
in bytes of
an
the