Advertisement
Quick Links
Tandberg Data publications can be requested from a Tandberg Data Sales Representative or ordered directly from
Tandberg Data.
For the latest information about Super DLTtape™ and DLTtape™ products and accessories, visit the Tandberg Data
web site at www.tandberg.com or the Technical Support site at www.dlttape.com.
Tandberg Data reserves the right to make changes and improvements to its products, without incurring
any obligation to incorporate such changes or improvements in units previously sold or shipped.
Publication Number: 432555-01
© 2002 Tandberg Data. All rights reserved. Tandberg Data and the Tandberg Data logo are trademarks of Tandberg
Data ASA. The DLTtape logo and the Super DLTtape logo are trademarks of Quantum Corporation, registered
in the U.S.A. and other countries. DLTtape, Super DLTtape, SuperLoader, and the SuperLoader logo are
trademarks of Quantum Corporation. Products mentioned herein are for identification purposes only and may be
trademarks or registered trademarks of their respective companies. All other trademarks are the property of their
respective owners.
For more information about Tandberg Data's
quality products, visit www.tandberg.com
SuperLoader
™
Magazine
Quick Start Guide
432555-01
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Tandberg Data SUPERLOADER DLT MAGAZINE
Summary of Contents for Tandberg Data SUPERLOADER DLT MAGAZINE
- Page 1 Publication Number: 432555-01 © 2002 Tandberg Data. All rights reserved. Tandberg Data and the Tandberg Data logo are trademarks of Tandberg Data ASA. The DLTtape logo and the Super DLTtape logo are trademarks of Quantum Corporation, registered in the U.S.A.
- Page 2 Place the magazine on a flat surface and rotate the assembly using the manual indexing wheel. When the carrier assemblies rotate freely, the magazine is ready for use. For additional information: Refer to the enclosed CD-ROM, Support here. or visit www.tandberg.com Grasp here.
- Page 3 Reinstall a Remove/reinstall magazine a magazine blank Section 3 explains To remove a magazine blank, pull Grasp the magazine by the handle with how to reinstall a the magazine straight out. one hand and support it underneath with the other hand. magazine.
-
Page 4: Change The Orientation
Change the orientation Any magazine or magazine blank can be Unsnap the handle carefully, ensuring configured to fit in the right or left you do not break the hinge. magazine bay. Slide Pull out 2-cartridge opening on top Right magazine handle Rotate the handle 180 degrees so that what was the top of the handle is now the bottom. - Page 5 Change the orientation, continued Rotate the magazine 180 degrees so that Change the orientation of a what was the front of the magazine is magazine blank now the back. Remove the two screws that attach the Snap the handle back on the front of the handle to the front of the magazine magazine.
- Page 6 Change the orientation, continued Rotate the handle 180 degrees so that what was the top of the handle is now the bottom. Right magazine handle Left magazine handle Snap the handle back on the front of the magazine blank. Install the two screws to attach the handle securely to the magazine blank.
Need help?
Do you have a question about the SUPERLOADER DLT MAGAZINE and is the answer not in the manual?
Questions and answers