Tandberg Data SLR7-140 PROGRAMMER Manual page 124

BYTE BIT 7
00 Peripheral Qualifier
01 Page Code = 81h
02 RESERVED
03 Page Length = 02h
04 R
05 Savlmp
Table 9-5:
Peripheral Qualifier
Peripheral Device
Type
Page Code
Page Length
Current Operating
Definition
SavImp
Default Operating
Definition
Tandberg Data
9.3.2.3. Implemented Operating Definitions
6 5
Current Operating Definition
Default Operating Definition
Implemented Operating Definitions Page
This field will
Unsupported LUN condition exists (if an IDENTIFY message
is received, the LUN field in the Command descriptor
block will be ignored and only the LUN field in the
IDENTIFY message will be evaluated.), this field will,
however, be set to 3.
This field is normally set to 1. When an Unsupported LUN
condition exists , this field will, however, be set to
1Fh.
This field will be set to the value of the Page Code
field in the Command Descriptor Block.
This field specifies
parameters that follow the Page Length field.
This field is set to 03h to indicate that the Drive
implements the SCSI-2 X3.131-1994 Operating Definition.
This bit is set to zero, to indicate that the operating
definition parameter can not be saved.
This field is set to 03h to indicate that the Drive
implements the SCSI-2 X3.131-1994 Operating Definition.
9-8 Tandberg SLR Product Line SCSI Functional Specifications
4 3
Peripheral Device Type
normally be set
the length
Inquiry
2 1 0
to zero. When
in bytes of
an
the