Table 9-4: Unit Serial Number Page - Tandberg Data SLR7-140 PROGRAMMER Manual

BYTE BIT 7
00 Peripheral Qualifier
01 Page Code = 80h
02 RESERVED
03 Page Length = 0Ch
04 Unit Serial Number
05
06
07
08
09
10
11
12
13
14
15 End of String = 00h
Peripheral Qualifier
Peripheral Device
Type
Page Code
Page Length
Unit Serial Number
Tandberg Data
9.3.2.2. Unit Serial Number
6 5
Table 9-4: Unit Serial Number Page
This field will
Unsupported LUN
message is received,
descriptor block will be ignored and only the LUN field
in the IDENTIFY message will be evaluated. ), this field
will, however, be set to 3.
This field is normally set to 1. When an Unsupported LUN
condition exists , this field will, however, be set to
1Fh.
This field will be set to the value of the Page Code
field in the Command Descriptor Block.
This field specifies
parameters that follow the Page Length field.
This is the unit serial number represented with 11 ASCII
characters. The string is terminated with a zero (00h)
character.
9-7 Tandberg SLR Product Line SCSI Functional Specifications
4 3
Peripheral Device Type
normally be set
condition exists
the LUN field
the length
Inquiry
2 1 0
to zero. When
( If an IDENTIFY
in the Command
in bytes of
an
the