Tandberg Data SLR7-140 PROGRAMMER Manual page 188

TMC
LP
Parameter Length
Head Cleaning Time
Counter
Tandberg Data
The Threshold Met Criteria (TMC) field is valid only if
ETC bit is 1 and it selects one of four possible
Threshold Met Criteria.
The default value is 11b. See the LOG SELECT command for
further description.
The List Parameters (LP) bit is set to 0 to indicate
that the parameter is a data counter.
(Note: This bit can not be changed by the initiator)
This field is set to 03h to indicate that the counter is
3 bytes wide.
The Head Cleaning Time indicates minutes of motion since
last head cleaning.
13-41 Tandberg SLR Product Line SCSI Functional Specifications
Log Sense