Head Cleaning Page; Table 13-36: Head Cleaning Page; Table 13-37: Clean Head Log Parameters - Tandberg Data SLR7-140 PROGRAMMER Manual

BYTE BIT 7
00 RESERVED
01 RESERVED
02 Page Length = 12h
03
04
 Clean Head Log Parameters
08
9

Head Cleaning Time Log Parameters
15
16
 Cleaning Count Log Parameters
21
Page Code
Page Length
BYTE BIT 7
n+0 Parameter Code = 0000h
n+1
n+2 DU
n+3 Parameter Length = 01h
n+4 RESERVED
Parameter Code
DU
DS
TSD
Tandberg Data
13.3.9.

Head Cleaning Page

6 5
Page Code = 33h

Table 13-36: Head Cleaning Page

The Page Code for this page is 33h.
This field is
parameters occupy 18 bytes.
Clean Head Log Parameters
6 5
DS TSD
Table 13-37: Clean Head Log Parameters
The Parameter Code is set to 0000h.
The Disable Update (DU) bit will always be set to 0 to
indicate that the Drive is always free to update the
counter.
(Note: This bit can not be changed by the initiator)
The Disable Save (DS) bit is set to 0 to indicate that
the Drive does support saving of this log parameter.
(Note: This bit can not be changed by the initiator)
The Target Save Disable (TSD) bit is set to 0. The Drive
will save this log parameter each time the parameter
value has been changed.
(Note: This bit can not be changed by the initiator)
13-39 Tandberg SLR Product Line SCSI Functional Specifications
4 3
set to 12h indicating
4 3
ETC TMC
Log Sense
2 1 0
that the
2 1
R LP
Clean
page
0