Parameter List; Table 23-2: Request Sense Parameter List - Tandberg Data SLR7-140 PROGRAMMER Manual

BYTE BIT 7
00 VADD
01 RESERVED
02 FMK
03 Information Bytes
04
05
06
07 Additional Sense Length
08 RESERVED
09
10
11
12 Additional Sense Code
13 Additional Sense Code Qualifier
14 FRU Code
15 SKSV
16 Sense Key Specific
17
18 RESERVED
19 Error Recovery Action Code (ERAC)
20 FOR INTERNAL USE
21 RESERVED
VADD
Response Code
FMK
EOM
ILI
Sense Key
Tandberg Data

23.3. Parameter List

6 5
Response Code
EOM ILI
Sense Key Specific
Table 23-2: REQUEST SENSE Parameter List
A Valid Address (VADD) bit of zero indicates that the
Information Bytes
indicates that
information.
The Response Code field is set to 70h for normal errors
and to 71h for deferred errors.
The Filemark
command has read a filemark.
The End Of Media (EOM) bit indicates that the last
command encountered
partition.
The Incorrect Length Indicator (ILI) bit indicates that
the requested logical block length did not match the
logical block length found on the tape.
This field holds information about the cause of error.
See section 23.4. for a description of the Sense Key
codes.
23-2 Tandberg SLR Product Line SCSI Functional Specifications
4 3
RES Sense Key
are undefined.
the Information
(FMK) bit indicates
end-of-partition
Request Sense
2 1
A VADD bit of
Bytes contain valid
that the current
or beginning-of-
0
one