Tandberg Data SLR7-140 PROGRAMMER Manual page 322

Parameter List
Length
Tandberg Data
This field specifies
parameter list
Initiator to the Drive. A Parameter List Length of zero
indicates that
Parameter List Length should be set to zero. Parameter
List Length greater than zero is reserved for Internal
Use only.
The following table shows the legal settings and the
corresponding actions taken for the ST (SelfTest), DOF
(DevOfl) and UOF (UnitOfl) bits:
ST DOF UOF
0 0 0
0 0 1
0 1 0
0 1 1
1 0 0
1 0 1
1 1 0
1 1 1
Table 26-2:
26-2 Tandberg SLR Product Line SCSI Functional Specifications
the length
that will be
no data will
Diagnostic Action
For Internal Use only
Illegal combination
Illegal combination
Illegal combination
Predefined Selftest Sequence 1
Predefined Selftest Sequence 2
Predefined Selftest Sequence 1
Predefined Selftest Sequences 1 and 2
SEND DIAGNOSTICS Functions
Send Diagnostics
in bytes of
transferred from
be transferred.
(not affecting media)
(affecting media)
(not affecting media)
the
the
The