Cartridge Manufacturer Page - Tandberg Data SLR7-140 PROGRAMMER Manual

BYTE BIT 7
00 PS
01 Page Length = 20h
02
 Cartridge Manufacturer ID
09
10 End Of String = 00h
11 RESERVED
12
 Cartridge Production Date
19
20 End Of String = 00h
21 RESERVED
22

Cartridge Serial Number
31
32 End Of String = 00h
33 RESERVED
Table 14-28:
PS
Page Code
Page Length
Cartridge
Manufacturer ID
Cartridge
Production Date
Cartridge Serial
Number
Tandberg Data

14.3.13. Cartridge Manufacturer Page

This page holds information on the currently inserted
tape cartridge.
This page can NOT be saved. Note that the MODE SELECT
command ignores
Manufacturer ID,
Serial Number fields (they are changeable).
6 5
R Page Code = 23h
Cartridge Manufacturer Data Parameters
The Parameter Savable (PS) bit must be set to zero.
The Page Code for this page must be set to 23h.
The Page Length is set to 20h.
These bytes hold
Cartridge Manufacturer. If no tape is inserted or if the
tape does not hold any manufacturer ID, the MODE SENSE
command will return the string "UNKNOWN " in this field.
The string is terminated with a zero (00h) character.
These bytes hold
production date
'DD.MM.YY'. If no tape is inserted or if the tape does
not hold any production
command will return the string "UNKNOWN " in this field.
The string is terminated with a zero (00h) character.
These bytes hold an ASCII string representing the serial
number of the current cartridge. If no tape is inserted
or if the tape does not hold any serial number, the MODE
SENSE command will return the string "UNKNOWN
field. The string
character.
14-37 Tandberg SLR Product Line SCSI Functional Specifications
the values given
Production Date
4 3
an ASCII string
an ASCII string
for the cartridge.
data code,
is terminated
Mode Select
in the Cartridge
Code and Cartridge
2 1 0
identifying
representing
The format
the MODE SENSE
" in this
with a zero (00h)
the
the
is