Tandberg Data SLR7-140 PROGRAMMER Manual page 18

Overlength
Page
Parameter
Partition
Reconnect
Reserved
SCSI
SCSI address
SCSI ID
Signal assertion
Signal de-assertion
SLR
Status
Third-party
Target
TLA
Track Set
Underlength
Volume
Tandberg Data
The incorrect length condition that exists after
executing a read group command, when the length of the
actual block read exceeds the requested transfer length
in the command descriptor block (CDB).
Several commands use regular parameter structures that
are referred to as pages. These pages are identified
with a value known as a page code.
A structure containing one or more fields.
The entire region of recording and reading paths in a
volume or in a portion of a volume.
The act of re-establishing the physical Initiator/Target
connection. A Target reconnects to an Initiator by
issuing RESELECTION and MESSAGE IN phases after winning
arbitration.
The term used for bits, fields and code values that are
set aside for future standardization.
Small Computer Systems Interface. Industry standard computer
peripheral interface. Used to connect several devices
via a common data and control bus.
The representation of the unique address (0-7) assigned
to a SCSI device. This address would normally be
assigned and set in the SCSI device during system
initialization.
The bit-significant representation of the SCSI address
referring to one of the SCSI-bus data lines.
The act of driving a signal to the true state.
The act of driving a signal to the false state.
Scaleable Linear Recording.
One byte of information sent from a Target to an
Initiator upon completion of each command.
When used in reference to RESERVE or RELEASE commands,
third-party means a reservation made on behalf of
another device.
SCSI-bus Device receiving/executing SCSI commands.
Three Letter Acronym.
A logical collection of N physical tracks which are
written or read simultaneously. A track set can be
viewed as a logical track that holds N times as much
data as a physical track and can transfer data N times
as fast as a physical track. A track set may consist of
only a single track, i.e. N = 1.
The incorrect length condition that exists after
executing a read group command when the requested
transfer length in the command descriptor block (CDB)
exceeds the length of the actual block read.
A recording medium together with its physical carrier.
1-4 Tandberg SLR Product Line SCSI Functional Specifications
Introduction