Remaining Capacity Page; Table 13-28: Remaining Capacity Page - Tandberg Data SLR7-140 PROGRAMMER Manual

BYTE BIT 7
00 RESERVED
01 RESERVED
02 Page Length = 0020h
03
04
 Remaining Capacity Parameters - Partition 0
11
12

Remaining Capacity Parameters - Current Partition
19
20
 Maximum Capacity Parameters - Partition 0
27
28

Maximum Capacity Parameters - Current Partition
35
Page Code
Page Length
Tandberg Data
13.3.7.

Remaining Capacity Page

6 5
Page Code = 31h

Table 13-28: Remaining Capacity Page

The Page Code for this page is 31h.
This field is set to 0020h indicating that the page
parameters occupy 32 bytes.
1
The SLR60 and SLR75 drives will not distinguish between SLRtape60 and
SLRtape75 when these are loaded into the drive. The drive will in
both cases report Remaining Capacity as if a SLRtape60 was loaded
until the drive has written or read one full track of data form BOT
to EOT. From that point onwards, Remaining Capacity will be reported
correctly also in the case an SLRtape75 is loaded
13-29 Tandberg SLR Product Line SCSI Functional Specifications
4 3 2
1
1
1
1
Log Sense
1 0