Tandberg Data SLR7-140 PROGRAMMER Manual page 312

Error Recovery
Action Code
FOR INTERNAL
USE
Tandberg Data
Bit Pointer The Bit Pointer field specifies the
erroneous bit in the byte designated
by
multiple-bit field is faulty, the Bit
Pointer field will point to the most
significant
field.
Field Pointer
the
Descriptor Block or of the Parameter
Block.
from zero.
This field indicates a suggested action to be taken by
the host system or operator when an exception has been
signaled by the drive.
0 : No action
1 : Clean drive
2 : Try another cartridge
3 : Run diagnostics
4 : Re-issue command
5 : Re-issue corrected command and/or parameter list
6 : Call service
This field is for Tandberg Data internal use only.
23-4 Tandberg SLR Product Line SCSI Functional Specifications
the Field Pointer.
(leftmost)
The Field Pointer field indicates
erroneous byte
Bytes are numbered
Request Sense
When a
bit of the
of the Command
starting