Commands Received Serially, Lun Is 0; Table 4-6: Connections, Lun And Initiator Id Combinations - Tandberg Data SLR7-140 PROGRAMMER Manual

Serial/Concurrent
Serial Commands
Concurrent Command
Table 4-6:
Tandberg Data
We have the following combinations of Initiator Ids, LUNs
and concurrent/serial command execution:
Connecting Initiator
Any Initiator
Same as original Initiator
Different Initiator
Connections, LUN and Initiator ID Combinations
I ni t i at or , I D = 6
C l i ent A
C l i ent B
C l i ent C
I ni t i at or , I D = 7
C l i ent X
C l i ent Y
Figure 4-1:
4.6.2.

Commands Received Serially, LUN Is 0

When the drive is not engaged in any command execution any
initiator may select the Drive. The Drive will respond to
the selection, the Initiator may send a new command, which
later will be executed by the Drive.
4-10 Tandberg SLR Product Line SCSI Functional Specifications
Specified LUN
0
Other than 0
0
Other than 0
0
Other than 0
SC SI Bus D r i ve, I D = 0
I ncor r ect I ni t i at or
C onnect i on
D r i ve, I D = 1
Connections, Some Examples
Commands
See Section
4.6.2
4.6.3
4.6.4
4.6.5
4.6.6
4.6.5
LUN 0
( LUN 1)
Uns uppor t ed LUN
LUN 0
C oncur r ent
C om m ands , D i f f er ent
I ni t i at or s t o Sam e LUN