Miscellaneous Parameters; User Page - Tandberg Data SLR7-140 PROGRAMMER Manual

Tandberg Data
15.3.10. Miscellaneous Parameters Page Descriptor
See the MODE SELECT command for details on the current,
saved and default values of this page (Page Code 20h)
The PS bit will be set to one for this page.
The Changeable Values page will return the following
values:
Byte 00 : A0h
Byte 01 : 10h
Byte 02 : FFh
Byte 03 : FFh
Byte 04 : 00h
Byte 05 : 00h
Byte 06 : FFh
Byte 07 : FFh
Byte 08 : 17h
Byte 09 : F7h
Byte 10 : FFh
Byte 11 : 40h
Byte 12 : 00h
Byte 13 : FFh
Byte 14 : FFh
Byte 15 : 00h
Byte 16 : 00h
Byte 17 : 00h
15.3.11. User Page 0 Page Descriptor
See the MODE SELECT command for details on the current,
saved and default values of this page (Page Code 21h)
The PS bit will be set to one for this page.
The Changeable Values page will return the following
values:
Byte 00 : A1h
Byte 01 : 0Ah
Byte 02 : FFh
Byte 03 : FFh
Byte 04 : FFh
Byte 05 : FFh
Byte 06 : FFh
Byte 07 : FFh
Byte 08 : FFh
Byte 09 : FFh
Byte 10 : FFh
Byte 11 : FFh
15-10 Tandberg SLR Product Line SCSI Functional Specifications
The Forced Streaming Count is changeable
-"-
The Load Function is changeable
The Power-Up/Reset Load-Delay is changeable
The EOWR, BSYI, BSYA and FAST bits are
changeable
The LED Function, CLN, OND and TIN bits are
changeable
The LEW position is changeable
The AEPU bit is changeable
The Bus Parity Error Retries is changeable.
The Selection Retries is changeable.
All Bytes are changeable
Mode Sense