Nvp Data (Buffer Id = 6); Tape Buffer Control Data (Buffer Id = 7); Volume Directory (Buffer Id = 8); Dbase Variables (Buffer Id = 9) - Tandberg Data SLR7-140 PROGRAMMER Manual

Tandberg Data
19.3.7.

NVP DATA (Buffer ID = 6)

The READ BUFFER command will transfer the contents of
the NVP (Non Volatile Parameters) area of the Flash
PROM.
19.3.8.

Tape Buffer Control Data (Buffer ID = 7)

The READ BUFFER command will transfer the contents of
the Tape Buffer Control area in DRAM.
19.3.9.

Volume Directory (Buffer ID = 8)

The READ BUFFER command will transfer the contents of
the Volume Directory area from DRAM.

19.3.10. Dbase Variables (Buffer ID = 9)

The READ BUFFER command will transfer the contents of
the Dbase Variable area.

19.3.11. Header File Dates (Buffer ID = 10 )

The READ BUFFER
header files for the actual code.

19.3.12. Trace Buffer Control Blocks (Buffer ID = 11)

The READ BUFFER command transfers the control blocks for
the trace buffer.

19.3.13. Complete Trace Buffer (Buffer ID = 12)

The READ BUFFER command transfers the memory and trace
data.
19-4 Tandberg SLR Product Line SCSI Functional Specifications
command transfers
Read Buffer
the dates of the