Show Stack-Port Counters; Show Stack-Port Diag - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

Term Definition
Configured Stack Stack or Ethernet.
Mode
Running Stack Stack or Ethernet.
Mode
Link Status Status of the link.
Link Speed Speed (Gbps) of the stack port link.

show stack-port counters

This command displays summary data counter information for all interfaces.
Format
show stack-port counters
Mode Privileged EXEC
Term Definition
Unit The unit number.
Interface The slot and port numbers.
Tx Data Rate Trashing data rate in megabits per second on the stacking port.
Tx Error Rate Platform-specific number of transmit errors per second.
Tx Total Error Platform-specific number of total transmit errors since power-up.
Rx Data Rate Receive data rate in megabits per second on the stacking port.
Rx Error Rate Platform-specific number of receive errors per second.
Rx Total Errors Platform-specific number of total receive errors since power-up.

show stack-port diag

This command shows front panel stacking diagnostics for each port and is only intended for Field
Application Engineers (FAEs) and developers. An FAE will advise on the necessity to run this
command and capture this information.
Format
show stack-port diag
Mode Privileged EXEC
Stacking Commands
Managed Switch CLI Manual, Release 8.0
Table 9:
v1.0, July 2009
2-11