Login Times Out - Novell NETWARE 6-DOCUMENTATION Manual

Login Times Out

132 Internetwork Packet Exchange
Other Router Names Are Not Displayed (page 135)
System Frequently Appears and Disappears on the LAN (page 135)
Multiple Systems on a LAN Become Unreachable Intermittently (page
138)
Connectivity Across a Point-to-Point Link Has Been Lost (page 139)
An NLSP Server on a LAN Cannot Be Accessed (page 140)
LAN Is Partitioned (page 141)
No Communication Occurs between Two Networks (page 142)
Services Are Inaccessible in the Area (page 143)
Number of Routes and Services on a System Shows Local Connectivity
Only (page 144)
Services or Routes are Fluctuating Excessively (page 145)
Heavy Network-Layer Traffic Occurs on a Point-to-Point Link (page
146)
Applications Perform Poorly (page 147)
CALLMGR Shows an IPX Circuit but IPXCON Does Not (page 149)
Single System Is Entering an Overloaded State (page 149)
Many Systems Are Entering an Overloaded State (page 149)
Connectivity Is Lost on Only One LAN (page 150)
NetWare Mobile IPX Client Loses Connectivity to the Server (page 151)
Re-establishing the Connection (page 151)
The remote IPX LAN number might have a static route on the dial-in side.
Load STATICON and select Dynamically Configure Static Routing Tables to
dynamically configure local and remote routing tables. To initiate dynamic
configuration with a remote router, the call to that router must be Connected.
Press Ins to use the Make Call option to attempt to make a call to a currently
Not Connected WAN destination.