Viewing The Macipx Gateway Configuration; Viewing Macipx Gateway Statistics - Novell NETWARE 6-DOCUMENTATION Manual

Viewing the MacIPX Gateway Configuration

Viewing MacIPX Gateway Statistics

122 Internetwork Packet Exchange
To view information about the configuration and operation of a MacIPX
gateway, enter the following command at the server prompt:
LOAD MACIPXGW SHOW=YES
This command does not reload the MacIPX gateway, but instead displays
information about the MacIPX gateway and the AppleTalk networks that it
serves, as in the following example:
MACIPXGW:
Unicast threshold set at 1.
AppleTalk nets this gateway is configured to serve:
10-20 111
AppleTalk nodes registered for IPX broadcasts:
IPX node: 0xffffffffffff
Socket: 0x452
10.238
Socket: 0x453
The information in the preceding example includes the following items:
The unicast threshold
The network numbers of all AppleTalk networks served by this gateway
All AppleTalk nodes currently registered with the MacIPX gateway for
broadcasts and identified by the IPX socket
To view MacIPX gateway statistics, load MONITOR and select the following
parameter path:
Select LAN/WAN Information > MACIPXGW
A screen displays the statistics explained in
2222-2223 3333-3335
1501.138 1502.168
Table 7 on page 123.
®