Main Window; Interfaces Window; Connections Window; Spoofing Statistics Window - Novell NETWARE 6-DOCUMENTATION Manual

Main Window

Interfaces Window

Connections Window

Spoofing Statistics Window

Table 6
Field
Spoofing State
Number of Spoofing
Started
Remaining Spoofing
Time
Sequence Numbers
The Main Window offers two options:
Interfaces enable users to view the spoofing statistics on a per interface
basis
SPX spoofing enables users to view the spoofing statistics of all SPX
connections
The Interfaces Window displays a list of WAN interfaces. At this time, only
PPP interfaces will be included on this list. You can select either one or all
listed interfaces. When you select an interface, the Connections Window is
displayed.
The Connections Window displays all connections for the selected interface,
either SPX or NCP. The Connections Window shows each connection's
interface name, source node, destination node, source ID, and destination ID.
The Spoofing Statistics Window displays the SPX and NCP spoofing statistics
for a selected connection.
require explanation.
Spoofing Statistics Fields
Meaning
Initial indicates that spoofing has not yet started; active indicates that spoofing
has started and is active; inactive indicates that spoofing has ended because
Remaining Spoofing Time expired.
Indicates the number of times spoofing has been started for this SPX
connection.
Indicates the time remaining in this spoofing session; when this time expires,
the spoofing state will change to inactive.
Shows the sent and received sequence number.
Table 6 describes the fields on this window that
Managing 115