Recording To A Disc; Basic Recording Operation - Yamaha CDR-D651 Owner's Manual

RECORDING

RECORDING TO A DISC .......................................................

1
NATURAL SOUND CD RECORDER CDR–D651
POWER
A
DISC

Basic Recording Operation

Recording is done on disc tray B of this unit. Disc tray A is
used for playback only. Recording operation is described
with buttons on this unit and the remote control. These
button names are noted in the order of "button name
(remote control button name)".
To load a disc
1.
Press POWER on the front panel to turn on the
power.
2.
Press v for disc tray B on your right (OPEN/
CLOSE B on the remote) to open the disc tray.
3.
Load a disc to be used for recording, correctly
aligned in the recessed area of the disc tray with
its recordable side facing down.
When loading an 8 cm (3 in.) disc, place it in the inner
recessed area of the disc tray. Do not put a normal 12
cm (5 in.) disc on top of an 8 cm disc.
4.
Press v (OPEN/CLOSE B on the remote) to
close the disc tray.
Note
• You can also close the disc tray by pressing the front edge of
the disc tray gently.
12
E-
2,4
REC MODE
COPY
DISPLAY A TEXT/TIME DISPLAY B
PHONES LEVEL
MIN MAX
3
MULTI JOG
INPUT
PUSH MODE
TRACK NO.
DISC A DIGITAL ANALOG
FINALIZE ERASE
DIGITAL REC LEVEL
B
DISC
Recordable
ReWritable
REC MUTE REC ANALOG REC LEVEL
FADE IN/OUT MIN MAX
When a new disc is loaded in this unit, this unit performs a
number of internal operations to determine the format and
content of the disc. During this time, "Reading" appears in
the display. This process requires approximately 10
seconds to complete for any type of disc.
Reading
When a CD-R or CD-RW disc without finalization performed
is loaded in this unit, OPC (Optimum Power Calibration) is
automatically performed to make an optimal recording. OPC
optimizes the laser power to the reflectivity of the disc.
During OPC, "OPC Adjust" appears in the display. This
process requires approximately 15 seconds to complete.
OPC Adjust
After the disc has been read and any necessary internal
adjustments have been performed, one of the following
displays appears, and normal operation is possible.
When a prerecorded audio CD is loaded in this unit
1
When a new CD-R or CD-RW disc is loaded in this unit
0
COPY
OPEN/CLOSE B
A
2,4
FADE IN/OUT
TRACK NO.
REC MUTE
REC WRITE
REC MODE FINALIZE ERASE
DISPLAY
L
dB –60 –30 –I0 –6 –4 –2 –I 0 OVER
R
L
dB –60 –30 –I0 –6 –4 –2 –I 0 OVER
R
CD
:
L
dB –60 –30 –I0 –6 –4 –2 –I 0 OVER
R
CD–R
:
L
dB –60 –30 –I0 –6 –4 –2 –I 0 OVER
R