Selected Channel Controls - Yamaha O2R Owner's Manual

SELECTED CHANNEL Controls

These controls are very similar in setup to the controls of an analog
mixer. You may find working with the buttons and controls of this
section of the 02R is much faster and more intuitive than working
through the screens of the DISPLAY ACCESS functions.
ROUTING buttons
The routing buttons allow you to directly select the destination for the
selected channel. The LEDs in the buttons illuminate to indicate the
status of the channel.
Note: You can customize your 02R so that when you adjust any of the
controls in this group, the display switches to the ROUTlNG display function. See
"Preferences" on page 162 of the User's Guide.
AUX controls
The AUX buttons allow you to select the auxiliary busses you want to
send the selected channel signal to. The SEND LEVEL rotary encoder is
used to set the level - indicated by the adjacent LED bargraph. The [ON]
button is used to turn the send on or off. This allows you to make quick
A-B comparisons.
User Interface 23
Digital Recording Console 02R User's Guide