Show Media Interface - Dell 8 Command Reference Manual

2

show media interface

show media interface
Displays the SFP information for a specific interface.
Synopsis show media interface {{in | ex}tengigabitethernet slot/port}
Operands extengigabitethernet
Defaults There are no default configurations for this command.
Command Privileged EXEC mode
Modes
Description Use this command to display a summary of the SFP information for the specified interface.
Usage There are no usage guidelines for this command.
Guidelines
Examples To display SFP information for 10 Gbps Ethernet interface:
See Also show media, show media linecard
32
Specifies a valid external 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
switch#show media interface extengigabitethernet 0/1
Interface InTenGigabitEthernet 0/1
Identifier 3
Connector 7
Transceiver 0000000000000010 10_GB/s
Name id
Encoding 6
Baud Rate 103 (units 100 megabaud)
Length 9u 0
Length 9u 0
Length 50u 8
Length 62.5u 3
Length Cu 0
Vendor Name BROCADE
Vendor OUI 42:52:4f
Vendor PN 57-0000075-01
Vendor Rev A
Wavelength 850 (units nm)
Options 001a Loss_of_Sig,Tx_Fault,Tx_Disable
BR Max 0
BR Min 0
Serial No AAA108454100431
Date Code 081108
Temperature 44 Centigrade
Voltage 3246.8
Current 0.002
TX Power 0.1
RX Power 0.1
SFP
LC
(units km)
(units 100 meters)
(units 10 meters)
(units 10 meters)
(units 1 meter)
(Volts)
(mAmps)
(uWatts)
(uWatts)
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01