Dot1X Timeout Re-Authperiod - Dell 8 Command Reference Manual
Dell converged enhanced ethernet command reference
Hide thumbs
Also See for 8:
- Owner's manual (346 pages) ,
- Update manual (186 pages) ,
- Getting started manual (172 pages)
Table of Contents
Advertisement
17
dot1x timeout re-authperiod
dot1x timeout re-authperiod
Sets the number of seconds between reauthorization attempts.
Synopsis
dot1x timeout re-authperiod seconds
Operands
seconds
Defaults
The default time is 3600 seconds.
Command
Interface configuration mode
Modes
Description
Use this command to set the number of seconds between reauthorization attempts.
Usage
There are no usage guidelines for this command.
Guidelines
Examples
To set 25 seconds as the amount of time between reauthorization attempts:
See Also
none
276
Specifies the seconds between reauthorization attempts. The range of valid
values is 1-4294967295.
switch(config)#interface extengigabitethernet 0/16
switch(conf-if-te-0/16)#dot1x timeout re-authperiod 25
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
Advertisement
Table of Contents
