Show Qos Rcv-Queue Interface - Dell 8 Command Reference Manual

16

show qos rcv-queue interface

show qos rcv-queue interface
Displays a summary of all QoS configurations applied to a Layer 2 Interface.
Synopsis show qos rcv-queue interface {{in | ex}tengigabitethernet slot/port | all}
Operands interface
Command EXEC mode
Modes
Description Use this command to display a summary of all QoS configurations applied to an Layer 2 Interface.
This includes the QoS Provisioning mode, CEE Map, Layer 2 Priority, Traffic Class Mapping,
Congestion Control, and the Scheduler policy.
Usage There are no usage guidelines for this command.
Guidelines
Examples To display the runtime ingress queue state information retrieved from the dataplane for a 10 Gbps
Ethernet interface:
See Also show qos rcv-queue multicast
264
Use this keyword to specify any of the following interfaces:
extengigabitethernet
Specifies a valid external 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
intengigabitethernet
Specifies a valid internal 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
all Reports QoS configurations for all 10 Gbps Ethernet interfaces within the
system.
switch#show qos rcv-queue interface intengigabitethernet 0/2
Interface InTenGigabitEthernet 0/2
In-use 404019 bytes, Total buffer 1081344 bytes
0 packets dropped
In-use
CoS Bytes
-------------------------
0 0 1081344
1 0 1081344
2 404019 1081344
3 0 1081344
4 0 1081344
5 0 1081344
6 0 1081344
7 0 1081344
Max
Bytes
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01