Sflow Enable Interface - Dell 8 Command Reference Manual

sflow enable interface

Enables sFlow on an interface.
Synopsis sflow enable interface
no sflow enable interface
Operands none
Defaults By default, sFlow is disabled on all interfaces.
Command Interface Mode
Modes
Description Use this command to enable sFlow on an interface.
Use the no sflow enable interface command to disable sFlow on an interface.
Usage This command is supported on physical ports and Link Aggregation Groups (LAG) ports. After a
Guidelines physical port is a member of a LAG, it inherits the sFlow configuration from the LAG port.
Examples To enable sFlow on an interface:
See Also sflow enable
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
switch(conf-if-te-0/1)#sflow enable interface
sflow enable interface
13
219