Spanning-Tree Instance - Dell 8 Command Reference Manual

Dell converged enhanced ethernet command reference
Hide thumbs Also See for 8:
Table of Contents

Advertisement

spanning-tree instance

Sets restrictions for the port of particular MSTP instance.
Synopsis
spanning-tree instance instance_id [cost cost |priority priority|restricted-role |restricted-tcn]
no spanning-tree instance instance_id [cost cost |priority priority|restricted-role |restricted-tcn]
Operands
instance_id
cost cost
priority priority
restricted-role
restricted-tcn
Defaults
The default path-cost value is 2000 on a 10 Gbps Ethernet interface.
Command
Interface configuration mode
Modes
Description
Use this command to set restrictions for a port on a particular MSTP instance.
Usage
Use this command for MSTP-specific configurations.
Guidelines
Examples
To set restrictions for the port of MSTP instance 1 with the cost of 40000:
See Also
instance, show spanning-tree
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
Specifies the MSTP instance. The range of valid values is 1-15.
Specifies the path-cost for a port. The range of valid values is 1-20000000.
Specifies the port priority for a bridge in increments of 16. The range of valid
values is 0-240.
Specifies to restrict the role of a port.
Specifies to restrict the propagation of the topology change notifications from
a port.
switch(conf-if-te-0/1)#spanning-tree instance 1 cost 40000
spanning-tree instance
11
189

Advertisement

Table of Contents
loading

Table of Contents