Cee-Map - Dell 8 Command Reference Manual

16

cee-map

cee-map
Enters the CEE map configuration mode.
Synopsis cee-map default
no cee-map
Operands default
Defaults There is no default value for this command.
Command Global configuration mode
Modes
Description Only a single CEE map is allowed, named "default". It is created when system starts up. The initial
configuration of the default CEE map is:
Precedence 1
Priority Group Table
Priority Table
FCoE CoS: None
Enabled on the following interfaces
Usage Use no cee-map to revert to the default values for the map.
Guidelines
Examples none
See Also cee, priority-group-table, priority-table, fcoe-map
240
The CEE map name.
1: Weight 40, PFC Enabled, TrafficClass 3, BW% 40
2: Weight 60, PFC Disabled, TrafficClass 6, BW% 60
15.0: PFC Disabled
15.1: PFC Disabled
15.2: PFC Disabled
15.3: PFC Disabled
15.4: PFC Disabled
15.5: PFC Disabled
15.6: PFC Disabled
15.7: PFC Disabled
CoS: 0 1 2
---------------------------------------------
PGID: 2 2 2
3 4 5 6 7
1 2 2 2 2
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01