6
system-name
system-name
Sets the global system name specific to LLDP.
Synopsis
system-name name
Operands
name
Defaults
By default, the host name from the switch is used.
Command
Protocol LLDP configuration mode
Modes
Description
Use this command to set the global system name specific to LLDP.
Usage
There are no usage guidelines for this command.
Guidelines
Examples
To specify a system name for the LLDP:
See Also
system-description
120
Specifies a system name for the LLDP. The valid values is a maximum of32
characters.
switch(conf-lldp)#system-name Dell
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01