Qos Queue Multicast Scheduler - Dell 8 Command Reference Manual

16

qos queue multicast scheduler

qos queue multicast scheduler
Configures the multicast Traffic Class packet expansion scheduler policy. All multicast Traffic Class
packet expansion queues are serviced Deficit Weighted Round Robin (DWRR).
Synopsis qos queue multicast scheduler dwrr mTC0_WEIGHT mTC1_WEIGHT mTC2_WEIGHT mTC3_WEIGHT
mTC4_WEIGHT mTC5_WEIGHT mTC6_WEIGHT mTC7_WEIGHT
no qos queue multicast scheduler
Operands dwrr
.Defaults The default weight value is 25 percent bandwidth for each multicast Traffic Class.
Command Global configuration mode
Modes
Description Use this command to configure the multicast Traffic Class packet expansion scheduler policy. All
multicast Traffic Class packet expansion queues are serviced Deficit Weighted Round Robin
(DWRR). This multicast Traffic Class packet expansion scheduler policy is applied uniformly across
the entire system. Use the no qos queue multicast scheduler command to return the multicast
Traffic Class packet expansion scheduler to the default value.
250
Configures the DWRR multicast Traffic Class packet expansion policy.
mTC0_WEIGHT Sets the DWRR weight for multicast Traffic Class 0 packet expansion in units
of bandwidth percentage. The sum of all weight values must equal 100
percent. The range of valid values is 0-100.
mTC1_WEIGHT Sets the DWRR weight for multicast Traffic Class 1 packet expansion in units
of bandwidth percentage. The sum of all weight values must equal 100
percent. The range of valid values is 0-100.
mTC2_WEIGHT Sets the DWRR weight for multicast Traffic Class 2 packet expansion in units
of bandwidth percentage. The sum of all weight values must equal 100
percent. The range of valid values is 0-100.
mTC3_WEIGHT Sets the DWRR weight for multicast Traffic Class 3 packet expansion in units
of bandwidth percentage. The sum of all weight values must equal 100
percent. The range of valid values is 0-100.
mTC4_WEIGHT Sets the DWRR weight for multicast Traffic Class 3 packet expansion in units
of bandwidth percentage. The sum of all weight values must equal 100
percent. The range of valid values is 0-100.
mTC5_WEIGHT Sets the DWRR weight for multicast Traffic Class 3 packet expansion in units
of bandwidth percentage. The sum of all weight values must equal 100
percent. The range of valid values is 0-100.
mTC6_WEIGHT Sets the DWRR weight for multicast Traffic Class 3 packet expansion in units
of bandwidth percentage. The sum of all weight values must equal 100
percent. The range of valid values is 0-100.
mTC7_WEIGHT Sets the DWRR weight for multicast Traffic Class 3 packet expansion in units
of bandwidth percentage. The sum of all weight values must equal 100
percent. The range of valid values is 0-100.
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01