Show Ip Route - Dell 8 Command Reference Manual

show ip route

Displays the current IP routing information.
Synopsis show ip route {| [ip-address [/mask] |longer-prefixes | static | connected | summary | all]
Operands ip-address/mask
longer-prefixes
static
connected
summary
all
Description Use this command to display the current IP routing information.
Defaults There are no default configurations for this command.
Command EXEC mode
Modes
User Guidelines There are no usage guidelines for this command.
Example Example output of this command:
switch>show ip route all
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
Gateway of last resort is 10.32.144.1 to network 0.0.0.0
S
C
S*
See Also show ip route summary
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
Mask for the route to be displayed. Valid values are integers between 0 and
32.
Specifies that only routes matching the ip-address and mask pair should be
displayed.
Display static routes only.
Display connected routes only.
Summary of all routes.
Shows both inactive and active routes.
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route
10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
10.0.0.0/8 [1/0] via 10.32.144.1
10.32.144.0/20 is directly connected, GigabitEthernet4/47
0.0.0.0/0 [1/0] via 10.32.144.1
5
show ip route
93