Mac Access-List Extended - Dell 8 Command Reference Manual

Dell converged enhanced ethernet command reference
Hide thumbs Also See for 8:
Table of Contents

Advertisement

mac access-list extended

Creates and assigns a name to the extended MAC access list.
Synopsis
mac access-list extended name
no mac access-list extended name
Operands
name
Command
Global configuration mode
Modes
Description
Use this command to create an extended MAC access list. If the ACL is already created, this
command puts the switch in the extended MAC access-list configuration mode. Use the no mac
access-list extended command to remove the access list.
Extended ACLs allow you to filter traffic based on the following:
You can apply named MAC extended ACLs to VLANs and to Layer 2 interfaces.
Usage
Standard and extended MAC ACLs cannot share the same name.
Guidelines
Example
To create a MAC extended ACL named mac1:
To delete a MAC extended ACL named mac1:
See Also
deny, permit, show access-lists
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
Assigns a name to the MAC extended access list. The maximum character
limit is 64.
Source MAC address
Destination MAC address
EtherType
switch(config)#mac access-list extended mac1
switch(conf-macl-ext)#
switch(config)#no mac access-list extended mac1
mac access-list extended
10
145

Advertisement

Table of Contents
loading

Table of Contents