Copy Startup-Config - Dell 8 Command Reference Manual

2

copy startup-config

copy startup-config
Copies the startup configuration file to a network server or a file URL.
Synopsis copy startup-config destination-file-url
Operands destination-file-url
Defaults There are no default configurations for this command.
Command Privileged EXEC mode
Modes
Description Use this command to copy the startup configuration file to a network server or a file URL.
Usage The following guidelines apply when using this command:
Guidelines
•
•
•
Examples To copy the startup configuration file to the local switch:
To copy the startup configuration file to a remote server through FTP:
To copy the startup configuration file to a remote server through SCP:
See Also write erase, copy running-config
6
Specifies the destination path to which the startup-config is to be copied
using the following formats:
FLASH Copies to URL [flash://]filename
FTP Copies to URL ftp:// [username [:password]@server/path]
SCP Copies to URL scp:// [username [:password]@server/path]
running-config Copies to the current running configuration.
An error displays if there is no startup configuration file, for example:
switch #copy startup-config file2
% Error: No Startup-config.
Use the write memory command to add entries in the startup configuration file.
Use the write erase command to delete entries from the startup configuration file.
switch#copy startup-config file2
Building configuration...
switch#copy startup-config flash://file2
Building configuration...
switch#copy startup-config ftp://admin@10.10.10.10/file2
Source password []?
Building configuration...
switch#copy startup-config scp://admin@10.10.10.10/file2
Source password []?
Building configuration...
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01