Show Mac Access-Group - Dell 8 Command Reference Manual

show mac access-group

Displays the current MAC ACL mapping to interfaces.
Synopsis show mac access-group [interface port-channel number | {in | ex}tengigabitethernet slot/port |
vlan vlan_id]
Operands interface
Defaults There are no default configurations for this command.
Command EXEC mode
Modes
Description Use this command to display the current MAC ACL mapping to interfaces.
Usage If you do not specify an interface, this command shows the mapping of MAC ACL to all interfaces.
Guidelines
Examples To display the current MAC ACL mapping for 10 Gbps Ethernet interface 0/1:
To display the current MAC ACL mapping for interface VLAN 100:
To display the current MAC ACL mapping for 10 Gbps Ethernet interface 0/7 where there is no ACL
applied:
See Also show running-config, show statistics
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
Specifies the interface for which to display the MAC ACL mapping.
port-channel number
Specifies the port-channel number. The range of valid values is 1–63.
extengigabitethernet
Specifies a valid external 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
intengigabitethernet
Specifies a valid internal 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
vlan vlan_id Specifies the VLAN number. The range of valid values is 1-3583.
switch#show mac access-group interface intengigabitethernet 0/1
Interface Te 0/1
Inbound access-list is std_acl
switch#show mac access-group interface vlan 100
Interface Vl 100
Inbound access-list is ext_acl
switch#show mac access-group interface intengigabitethernet 0/7
Interface Te 0/7
Inbound access-list is not set
show mac access-group
10
155