Chapter 2 Configuration Management Commands; Copy - Dell 8 Command Reference Manual

Configuration Management Commands

copy

Copies one file to another location.
Synopsis copy source-file-url destination-file-url
Operands source-file-url
destination-file-url
Defaults There are no usage guidelines for this command.
Command Privileged EXEC mode
Modes
Description Use this command to copy a file to another location.
Usage There are no usage guidelines for this command.
Guidelines
Examples To copy the source file to a remote machine using FTP:
To copy the source file from a remote machine using SCP:
To copy the source file from a local switch:
See Also write erase, copy running-config
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
Specifies location of the source file to be copied using one of the following
formats:
FLASH Copies from URL [flash://]filename
FTP Copies from URL ftp:// [username [:password]@server/path]
SCP Copies from URL scp:// [username [:password]@server/path]
Specifies the destination file using one of the following formats:
FLASH Copies to URL [flash://]filename
FTP Copies to URL ftp:// [username [:password]@server/path]
SCP Copies to URL scp:// [username [:password]@server/path]
running-config Copies to the current running configuration.
startup--config Copies to the current startup configuration file.
switch#copy ftp://user@10.10.10.10/file1 file2
Source password []?
switch#copy scp://user:password@10.10.10.10/file1 file2
switch#copy flash://file1 file2
Chapter
2
5