Show Interface - Dell 8 Command Reference Manual

3

show interface

show interface
Displays the configuration and status of an interface.
Synopsis show interface [{in | ex}tengigabitethernet slot/port | port-channel number| switchport]
Operands tengigabitethernet
port-channel number
switchport
Defaults There are no default configurations for this command.
Command EXEC mode
Modes
Description Use this command to show the running system status and configuration for a specified interface.
Usage There are no usage guidelines for this command.
Guidelines
Examples To display information for a 10 Gbps Ethernet interface:
See Also show interface vlan
48
Specifies a valid 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
Specifies the interface is a port-channel. The range of valid values is 1-63.
Specifies the Layer 2 interface.
switch#show interface intengigabitethernet 0/1
Interface name
Switchport mode
Ingress filter
Acceptable frame types
Default Vlan
Active Vlans
Inactive Vlans
Interface name
Switchport mode
Ingress filter
Acceptable frame types
Default Vlan
Active Vlans
Inactive Vlans
: InTenGigabitEthernet 0/7
: access
: enable
: all
: 1
: 1
: -
: InTenGigabitEthernet 0/1
: access
: enable
: all
: 5
: 5
: -
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01