Debug Ip Igmp All - Dell 8 Command Reference Manual

12

debug ip igmp all

debug ip igmp all
Displays all IGMP information.
Synopsis debug ip igmp {all | group [A.B.C.D [interface [{in | ex}tengigabitethernet slot/port] interface
port-channel number| interface vlan vlan_id]]}
Operands all
A.B.C.D
interface
Description Displays all of the IGMP packets received and sent, and IGMP-host related events.
Defaults There are no defaults for this command.
Command Privileged EXEC mode
Modes
User Guidelines There are no user guidelines for this command.
Example none
See Also none
202
Displays all values.
Specifies the group address, as a subnet number in dotted decimal format
(for example, 10.0.0.1), as the allowable range of addresses included in the
multicast group.
Use this keyword to specify any of the following interfaces:
vlan vlan_id Specifies which VLAN interface to display the snooping configuration related
information. The range of valid values is 1-3583.
extengigabitethernet
Specifies a valid external 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
intengigabitethernet
Specifies a valid internal 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
port-channel number
Specifies the interface is a port-channel. The range of valid values is 1-63.
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01