Ip Route - Dell 8 Command Reference Manual

5

ip route

ip route
Configures a static IP route.
Synopsis ip route prefix mask {ip-address | interface interface-type interface-number} [distance]
no ip route prefix mask {ip-address | interface interface-type interface-number}
Operands
interface
distance
Description Use this command to configure static IP routes.
Defaults There are no default configurations for this command.
Command Global configuration mode.
Modes
User Guidelines Use no ip route to remove the static IP route.
Example none
See Also none
86
prefix IP route prefix for the destination.
mask Prefix mask for the destination. Both dotted decimal and integers between
1-32 are supported.
ip-address IP address of the next hop that can be used to reach that network.
interface-type Network interface type (external TenGigabitEthernet interface, null,
port-channel, or VLAN).
interface-number
Layer-2 or layer-3 Interface number.
An administrative distance (1-255). The default administrative distance for a
static route is 1.
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01