show sflow interface
Displays sFlow information on a specific interface.
Synopsis
show sflow interface name
Operands
interface name
Defaults
By default, sFlow is disabled on all interfaces.
Command
EXEC mode
Modes
Description
Use this command to display sFlow information on a specific interface.
Usage
There are no usage guidelines for this command.
Guidelines
Examples
To display sFlow statistics on 10 Gbps Ethernet interface 1/16:
See Also
show sflow
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
Specifies the name of the interface.
switch#>show sflow interface tengigabitethernet 1/16
te 1/16
Configured sampling rate :8192
Actual sampling rate :8192
Counter polling interval :15
Samples rcvd from h/w :33
show sflow interface
225
13