Lacp Timeout - Dell 8 Command Reference Manual

7

lacp timeout

lacp timeout
Sets the timeout value used by LACP to exchange packets on an interface.
Synopsis lacp timeout [long | short]
no lacp timeout
Operands timeout
Defaults By default, the short timeout value is 3 seconds for Dell trunks. For standard trunks, the long
timeout value is 90 seconds.
Command Interface configuration mode
Modes
Description Use this command to set the short timeout value for Dell trunks or to set the long timeout value for
standard trunks. Use the no lacp timeout command to return to the default value.
Usage If the LACP_timeout bit (encoded in Actor_State and Partner_State fields) is set to 1, the short
Guidelines timeout takes effect; if set to 0 (zero), the long timeout takes effect.
Examples To set the LACP short timeout value to 5 seconds:
See Also none
128
Specifies the number of seconds before invalidating a received Link
Aggregation Control Protocol (LACP) data unit (DU).
long Specifies a long timeout value.
short Specifies a short timeout value.
switch(conf-if-te-0/1)#lacp timeout short 5
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01