Rmon Event - Dell 8 Command Reference Manual

rmon event

Adds or removes an event in the RMON event table associated to the RMON alarm number.
Synopsis rmon event index [description word] [log] [owner name] [trap word]
no rmon event index [description word] [log] [owner name] [trap word]
Operands index
description word
log
owner name
trap word
Defaults There are no events configured.
Command Global configuration mode
Modes
Description Use this command to add or remove an event in the RMON event table that is associated with an
RMON alarm number. Use the no rmon event command to remove the event configuration.
Usage There are no usage guidelines for this command.
Guidelines
Examples To configure an RMON event:
See Also show rmon events
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
Specifies the RMON event number. The range of valid values is 1-65535.
Specifies a description of the event.
Generates an RMON log when an event is triggered.
Specifies the owner of the event. The maximum number of characters is 32.
Specifies the SNMP community or string name to identify this trap.
switch(config)#rmon event 2 log description "My Errorstoday" owner gjack
15
rmon event
235