Lldp Dcbx-Version - Dell 8 Command Reference Manual

6

lldp dcbx-version

lldp dcbx-version
Specifies which version of the Data Center Bridging Exchange (DCBX) protocol to use.
Synopsis lldp dcbx-version [auto |cee | pre-cee]
Operands auto
cee
pre-cee
Defaults The default is auto.
Command Interface configuration mode
Modes
Description Use this command to specify which version of the DCBX protocol to use.
Usage There are no usage guidelines for this command.
Guidelines
Examples To specify which DCBX version to use:
See Also none
106
Specifies to auto adjust the DCBX protocol version to accommodate the
difference when a switch interacts with different vendors using a different
version of the DCBX protocol.
Specifies to use the Converged Enhanced Ethernet (CEE) DCBX version.
Specifies to use the standard DCBX version, which is the version released
prior to the CEE DCBX release.
switch(conf-if-te-0/1)#lldp dcbx-version cee
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01