Clear Spanning-Tree Counter - Dell 8 Command Reference Manual

clear spanning-tree counter

Clears all spanning-tree counters on the interface.
Synopsis clear spanning-tree counter [interface| port-channel number | {in | ex}tengigabitethernet
slot/port]
Operands interface
port-channel number
tengigabitethernet
Defaults There are no default configurations for this command.
Command Privileged EXEC mode
Modes
Description Use this command to clear the spanning-tree counters on the interface.
Usage If the interface operand is not specified, spanning-tree counters are cleared for all interfaces.
Guidelines
Examples To clear spanning-tree counters for all interfaces:
To clear spanning-tree counters for a 10 Gbps Ethernet interface:
To clear spanning-tree counters for port-channel 23:
See Also show spanning-tree
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
Specifies the interface on which to clear the spanning-tree counters.
Specifies the port-channel number. The range of valid values is 1-63.
Specifies a valid 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
switch#clear spanning-tree counter
switch#clear spanning-tree counter interface intengigabitethernet 0/1
switch#clear spanning-tree counter interface port-channel 23
clear spanning-tree counter
11
159