Show Ip Igmp Groups - Dell 8 Command Reference Manual

12

show ip igmp groups

show ip igmp groups
Displays information related to learned groups in the IGMP protocol module.
Synopsis show ip igmp groups [A.B.C.D | detail [[interface | detail [{in | ex}tengigabitethernet slot/port]
interface port-channel number | detail| [interface vlan vlan_id | detail]]
Operands A.B.C.D
interface
interface
interface
Defaults There are no defaults for this command.
Command Privileged EXEC mode
Modes
Description Use this command to display the IGMP database, including configured entries for either all groups
on all interfaces, or all groups on specific interfaces, or specific groups on specific interfaces.
Usage There are no usage guidelines for this command.
Guidelines
Examples none
See Also none
214
Specifies the group address, as a subnet number in dotted decimal format
(for example, 10.0.0.1), as the allowable range of addresses included in the
multicast group.
detail Displays the IGMPv3 source information.
Use this keyword to specify any of the following interfaces:
detail Displays the IGMPv3 source information.
Use this keyword to specify any of the following interfaces:
vlan vlan_id Specifies which VLAN interface to display the snooping configuration related
information. The range of valid values is 1-3583.
detail Displays the IGMPv3 source information.
Use this keyword to specify any of the following interfaces:
port-channel number
Specifies the interface is a port-channel. The range of valid values is 1-63.
detail Displays the IGMPv3 source information.
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01