Dot1X Timeout Server-Timeout - Dell 8 Command Reference Manual

dot1x timeout server-timeout

Sets the authentication sever response timeout.
Synopsis dot1x timeout server-timeout seconds
Operands seconds
Defaults The default timeout is 30 seconds.
Command Interface configuration mode
Modes
Description Use this command to set the authentication sever response timeout.
Usage There are no usage guidelines for this command.
Guidelines
Examples To set 40 seconds as the switch-to-authentication server transmission time:
See Also none
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
Specifies the number of seconds that a switch waits for the transmission of
packets by the switch to the authentication server. The range of valid values
is 1-65535.
switch(config)#interface extengigabitethernet 0/16
switch(conf-if-te-0/16)#dot1x timeout server-timeout 40
dot1x timeout server-timeout
17
277